CGF INSPECTION Pre-shipment inspection for Electromotor
Sourcing large industrial electromotors, three-phase motors, high-voltage motors and driving motors from Chinese manufacturers? CGF Inspection provides reliable Pre-Shipment Inspection (PSI) service for electromotors...
CGF Pre-Shipment Inspection for Electromotor
Sourcing large industrial electromotors, three-phase motors, high-voltage motors and driving motors from Chinese manufacturers? CGF Inspection provides reliable Pre-Shipment Inspection (PSI) service for electromotors before goods leave the factory.
Pre-Shipment Inspection will be scheduled when over 80% of bulk production is finished. Our inspectors carry out random sampling according to recognized AQL standards to evaluate overall quality consistency. All non-conformities will be photographed, recorded and notified to the factory for rectification before container loading.
Complete Electromotor Inspection Checklist
Specification & Dimension Verification
Measure overall size, shaft diameter, shaft extension length, mounting hole position and flange size. Confirm motor model, power, speed match your technical requirements and approved sample.
Casing & Surface Appearance Inspection
Check motor housing for paint damage, scratches, rust spots, casting pores, cracks and deformation. Inspect oil seal end cover for traces of oil leakage.
Nameplate & Marking Audit
Verify nameplate parameters including power, voltage, frequency, IP rating, insulation class and serial number. Check warning labels, rotation mark and certification logos are complete and legible.
Terminal Box & Internal Wiring Check
Inspect terminal block tightness, cable entry sealing, wire arrangement, grounding connection. Prevent loose wiring, poor sealing leading to water or dust ingress.
No-Load Operation Performance Test
Switch on power for running test. Monitor abnormal friction noise, excessive vibration, overheating and irregular rotation speed.
Electrical Safety Test
Complete insulation resistance test and continuity of protective earth circuit to meet standard safety requirements.
Anti-Rust Treatment & Export Packaging Check
Inspect anti-rust oil on shaft, plastic protective covers, moisture-proof desiccant inside crate. Check wooden box strength, shockproof filler and correct shipping marks.
English Inspection Report
After on-site audit, you will receive a full inspection report including dimension data, defect photos, testing records and comprehensive quality conclusion.
Avoid motor breakdown and customer claims after arrival. Arrange professional pre-shipment inspection for your electromotor orders with CGF Inspection.
What We Check
- Visual & workmanship inspection against your approved AQL
- Functional and safety testing on sampled units
- Key dimensions and specifications vs the signed sample
- Quantity verification — cartons, units and assortment
- Packaging, inner/outer carton, labeling and barcode checks
- On-site photography and, where needed, carton-drop or smell tests
When To Book This Service
- Finished goods are 80–100% produced and at least 80% packed
- Before you release the final balance payment to the factory
- For a new supplier, a new product, or any high-value order
How CGF Conducts It
- We agree the AQL level (General II, normal) and sample size with you
- A local CGF inspector visits the factory on the confirmed date
- Checks cover appearance, function, measurement and packing
- All findings are photo-documented on site
- A detailed English report is sent within 24 hours
Why It Matters
- Catch defects before the goods leave China — far cheaper than returns
- Protect your final payment until quality is verified
- Avoid rejected shipments, chargebacks and brand damage
- Get independent evidence for any supplier dispute
Industries We Cover
Where We Operate
Zhejiang, Jiangsu, Shanghai, Guangdong (Dongguan / Shenzhen / Foshan / Shunde), Qingdao, Sichuan, Chongqing and across China.
Inspection Standards We Work To
| Standard | What it covers |
|---|---|
| AQL (Acceptance Quality Limit) | Defines the maximum number of defective units acceptable in a random sample — the basis of our sampling plans. |
| ANSI/ASQ Z1.4 | U.S. standard for sampling by attributes (single, double and multiple sampling). |
| ISO 2859-1 | International general standard for sampling by attributes, equivalent to ANSI/ASQ Z1.4. |
| ISO 9001 | Quality management system baseline referenced in our factory audits. |
| IEC / EN / ASTM | Product-specific safety & performance references applied per your specification. |
Every CGF assignment includes
- An independent, on-site inspector working for you — never the factory
- Internationally recognised AQL sampling (ANSI/ASQ Z1.4 · ISO 2859-1)
- On-site photos embedded in every report
- A detailed, bilingual English inspection report within 24 hours of the visit
Related Inspection Work
